{{ 'fb_in_app_browser_popup.desc' | translate }} {{ 'fb_in_app_browser_popup.copy_link' | translate }}
{{ 'in_app_browser_popup.desc' | translate }}
{{word('consent_desc')}} {{word('read_more')}}
{{setting.description}}
11/18~11/22 員工旅遊,暫停出貨及回覆訂單,11/23 恢復作業,請自行評估下單及收貨時間。
最後出貨日|郵局 11/16|7-11、黑貓宅配 11/17 中午 12:00 前
{{ childProduct.title_translations | translateModel }}
{{ getChildVariationShorthand(childProduct.child_variation) }}
{{ getSelectedItemDetail(selectedChildProduct, item).childProductName }} x {{ selectedChildProduct.quantity || 1 }}
{{ getSelectedItemDetail(selectedChildProduct, item).childVariationName }}
Grove ring of 16 addressable WS2813 Mini RGB LEDs, with pads for chaining several rings
3.3V/5V supply | 58mm ring diameter | 2KHz refresh | break-point continuous transmission
Each LED is controlled individually for color and brightness in lighting and costume projects
滿千免運優惠(限郵寄和超商純取貨) on order
本賣場無實體店面,無提供自取服務,敬請見諒。 on order
Not enough stock.
Your item was not added to your cart.
Not enough stock.
Please adjust your quantity.
{{'products.quick_cart.out_of_number_hint'| translate}}
{{'product.preorder_limit.hint'| translate}}
Limit {{ product.max_order_quantity }} per order.
Only {{ quantityOfStock }} item(s) left.
Seeed Studio Grove RGB LED 燈環(16 顆 WS2813 Mini)是由 16 顆可定址 WS2813 Mini RGB LED 排成的燈環,每顆 LED 的驅動晶片就在燈珠內,可單獨控制顏色與亮度,色彩階調為 256 階、可顯示 16,777,216 色。WS2813 支援訊號斷點續傳:只要沒有相鄰兩顆以上的 LED 損壞,其餘 LED 仍能正常運作。燈環背面保留可串接的焊墊,可串接多個燈環,也能接上不同直徑的燈環;板上的 Grove 接頭則讓接線更簡單。
256 階亮度、16,777,216 色,16 顆 LED 各自獨立控制。
採雙訊號線設計,單顆 LED 損壞不會讓其他 LED 跟著不亮;只要不是相鄰兩顆以上損壞,其餘仍正常運作。
每顆 LED 為恆流驅動,電壓有變動時顏色依然一致。
背面保留串接焊墊,可串接多個燈環,也能串接不同直徑的燈環。
可直接以 Grove 連接線接上 Seeeduino 或 Arduino 加 Base Shield,不需焊接。
兩個電源埠相互隔離;Grove VCC 最多供電 400mA,串接多環時請改由 VIN 供電。
| 規格項目 | 規格內容 |
|---|---|
| LED | WS2813 Mini × 16 |
| 供電 | 3.3V/5V |
| 靜態電流 | 0.7mA/顆 |
| RGB 通道恆流 | 16mA/顆 |
| 更新頻率 | 2KHz |
| 重置時間 | >280μs |
| 環半徑 | 29mm(直徑 58mm) |
| 工作溫度 | -25~85°C |
| 儲存溫度 | -40~105°C |
為舞台服裝增添燈光效果。
創意電子小物件與造型裝置。
點光源顯示類應用。
可以串接多個燈環嗎?
可以。背面保留串接焊墊,可串接多個燈環,也可以接上不同直徑的燈環。
串接多個燈環要怎麼供電?
Grove VCC 最多只能供電 400mA,串接多個燈環時請改由 VIN 供電。
有一顆 LED 壞掉會怎樣?
WS2813 支援訊號斷點續傳,只要沒有相鄰兩顆以上的 LED 損壞,其餘 LED 仍可正常運作。
訊號可以從哪裡輸入?
控制訊號可由 Grove SIG 腳位或 DIN 輸入,但兩邊的訊號輸入是相連的,請勿同時輸入不同訊號。
iCShop 提供 ESP32、Raspberry Pi、micro:bit、M5Stack、Arduino 等開發平台與各式 Grove LED 燈環與燈條模組, 並提供 STEAM 教具、專題專案設計開發與教育解決方案。
適合學校教學、學生專題、研究單位、企業研發及大量採購需求。 如有專案需求、產品選型或大量採購,歡迎洽詢 iCShop。