icShop Logo
Welcome, ( 登入 or 註冊 )


創客萊吧 官方網站

3.2inch 320x240 Touch LCD (C)
$ 599.0 元

2.8" TFT Touch Shield for Arduino(電容式觸控)【限量6個】
售價 : NT
$ 1,690.0 元
$ 1,300.0 元
製造商 :
適用運送方式 : 7-11取貨付款,7-11純取貨,郵寄(單一運費),貨運,宅配,貨到付款,7
出貨時程: 數量有限,售完為止,不再追加。   

輸入數量 :
Add to wish list
產品上架時間 2015 一月 16 週五.



Add some sizzle to your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection and a capacitive touchscreen. This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240x320 pixels with individual pixel control. It has way more resolution than a black and white 128x64 display. As a bonus, this display has a capacitive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.

This shield is the capacitive version as opposed to the resistive touchscreen we also sell. This touchscreen doesn't require pressing down on the screen with a stylus, and has a nice glossy glass cover. It is a single-touch display.

This shield uses SPI for the display and SD card and is easier to use with UNO, Mega & Leonardo Arduino's. The capacitive touchscreen controller uses I2C but you can share the I2C bus with other I2C devices.

The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you'll have it running in under 10 minutes! Works best with any classic Arduino (UNO/Duemilanove/Diecimila). Solder three jumpers and you can use it at full speed on a Leonardo or Mega as well.

This display shield has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. This shield needs fewer pins than our v1 shield, so you can connect more sensors, buttons and LEDs: 5 SPI pins for the display, 2 shared I2C pins for the touchscreen controller and another pin for uSD card if you want to read images off of it.

Of course, we wouldn't just leave you with a datasheet and a "good luck!" - we've written a full open source graphics library that can draw pixels, lines, rectangles, circles and text. We also have a touch screen library that detects x, y and z (pressure) and example code to demonstrate all of it. The code is written for Arduino but can be easily ported to your favorite microcontroller!

Technical Details

    • 2.8" diagonal color touchscreen TFT
    • 240x320 resolution, 18-bit (262,000) color - our library uses 16 bit color mode
    • ILI9341 (datasheet) controller with built in video RAM buffer
    • FT2606 touch screen controller
    • High speed SPI display with digital I2C touchscreen driver
    • The display uses digital pins 13-9. Touchscreen controller requires I2C pins SDA and SCL. microSD pin requires digital #4. That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available if not using the microSD
    • Works with any classic Arduino '328. Solder closed three jumpers to use the ICSP header for use with Leonardo or Mega
    • Onboard 3.3V @ 300mA LDO regulator, current draw depends on usage but is about 100mA for the display and touchscreen
    • 4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control
    • Single-touch capacitive touch bonded on top

5個- MOLEX 超薄 2.54 2P 母座
連接器 ROHS
$ 7.0 元
1 x '5個- MOLEX 超薄 2.54 2P 母座'
12mm 金屬按鈕-圓頭 (自復)
$ 65.0 元
1 x '12mm 金屬按鈕-圓頭 (自復)'
$ 79.0 元
1 x '15張-箭頭標籤貼紙'
50ml 塑膠瓶 (附針頭)
$ 20.0 元
1 x '50ml 塑膠瓶 (附針頭)'
瑞昱 Ameba RTL8195AM 開發板【缺貨中】
物聯網開發板 , 阿米巴
$ 650.0 元
1 x '瑞昱 Ameba RTL8195AM 開發板【缺貨中】'
5條- Grove- 4x公端杜邦線+母座 to Grove 4pin 連接線
Grove - 4 pin Male Jumper to Grove 4 pin Conversion Cable (5 PCs per Pack)
$ 100.0 元
1 x '5條- Grove- 4x公端杜邦線+母座 to Grove 4pin 連接線'
G3 PM2.5 感測器

$ 780.0 元
$ 650.0 元
1 x 'G3 PM2.5 感測器'
DS3231 時鐘模塊
RTC Raspberry Pi 樹莓派 Arduino
$ 55.0 元
1 x 'DS3231 時鐘模塊'