icShop Logo
Welcome, ( 登入 or 註冊 )


創客萊吧 MakerLab

3.2inch 320x240 Touch LCD (C)
$ 599.0 元

1.44" 128x128 TFT LCD Display【限量1個】
售價 : NT
$ 650.0 元
$ 450.0 元
製造商 :Adafurit
適用運送方式 : 7-11取貨付款,7-11純取貨,郵寄(單一運費),貨運,宅配,貨到付款,7
出貨時程: 數量有限,售完為止,不再追加。   

輸入數量 :
Add to wish list
產品上架時間 2015 四月 16 週四.



This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!
The 1.44" display has 128x128 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 16-bit color using our library code.
The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included, but you can pick one up here.
Of course, we wouldn't just leave you with a datasheet and a "good luck!" - we've written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code and a wiring tutorial. The code is written for Arduino but can be easily ported to your favorite microcontroller!




    • 1.44" diagonal LCD TFT display
    • 128x128 resolution, 18-bit (262,144) color
    • ST7735R (datasheet) controller with built in pixel-addressable video RAM buffer
    • 4 or 5 wire SPI digital interface
    • Built-in microSD slot - uses 2 more digital lines
    • 5V compatible! Use with 3.3V or 5V logic
    • Onboard 3.3V @ 150mA LDO regulator
    • 1 white LED backlight, transistor connected so you can PWM dim the backlight
    • 1x10 header for easy breadboarding
    • 4 x 0.9"/2mm mounting holes in corners
    • Overall dimensions: 33m x 45mm x 7mm / 1.3" x 1.8" x 0.3"
    • Mounting Holes: 36mm x 36mm / 1.4" x 1.4"
    • Weight: 10.6g
    • Current draw is based on LED backlight usage: with full backlight draw is ~25mA



5條- Grove- 4x公端杜邦線+母座 to Grove 4pin 連接線
Grove - 4 pin Male Jumper to Grove 4 pin Conversion Cable (5 PCs per Pack)
$ 100.0 元
1 x '5條- Grove- 4x公端杜邦線+母座 to Grove 4pin 連接線'
5條-Grove-Universal 4 Pin Buckled 20cm Cable【限量】
4pin連接線 無扣 公對公 連接線
$ 95.0 元
1 x '5條-Grove-Universal 4 Pin Buckled 20cm Cable【限量】'
5條- Grove - 4pin 連接線5cm【限量2個】
Grove - Universal 4 Pin Buckled 5cm Cable (5 PCs Pack),Grove - Base Shield
$ 70.0 元
1 x '5條- Grove - 4pin 連接線5cm【限量2個】'
ADS1115 16-Bit ADC- 4 Channel
16位 模數 轉換器 with Programmable Gain Amplifier 四通道 ADC模組 具可變增益放大
$ 110.0 元
1 x 'ADS1115 16-Bit ADC- 4 Channel'
PA-09 壓著鉗(日製)ENGINEER
連接器端子鉗 1.25~2.5mm Crimping Pliers for JST壓著鉗
$ 1,700.0 元
1 x 'PA-09 壓著鉗(日製)ENGINEER'
RoHS, 608-391A , Pro'sKit, 夾子放大鏡 寶工
$ 230.0 元
1 x '2.5倍膠片放大輔助夾座'
40條-彩色杜邦雙頭線(母/母 )/10 cm
10cm 杜邦線 母對母 彩色線 40p
$ 32.0 元
1 x '40條-彩色杜邦雙頭線(母/母 )/10 cm'