icShop Logo
Welcome, ( 登入 or 註冊 )


創客萊吧 MakerLab

單8 共陽0.56吋 點亮(黑面紅膠)七段顯示器
$ 13.0 元

個位數米字型16段顯示器(綠光) 0.8吋共陽
售價 : NT$ 75.0 元
製造商 :seeed studio
適用運送方式 : 7-11取貨付款,7-11純取貨,郵寄(單一運費),貨運,宅配,貨到付款,7
出貨時程: 【現貨+預購】如遇缺貨,預購交期為4~10個工作天(不含例假日)   

輸入數量 :
Add to wish list
產品上架時間 2015 八月 06 週四.

This is a 16 segment common cathode LED and is green. The advantage of 16 segment is that you can not only display 1234567890, but also ABCDEFGHIJKLM.

It is compatible with bread board and can work with Arduino by adding some current limiting resistors. So, it Suitable for people who is newbie of electronic.

Note: It just a segment LED without control chip.

High Light
low current
low energy

0.80 inch
common port: 11
size: 20.0 x 27.7 x 8.5mm
Colors: green
surface colors: Black
Working temperature: -20~60°C

Mechanical Outline
Unspecified Tolerances is: X±0.2



Absolute Maximum Ratings

Parameter Symbol Maximum Rating Unit
Power Dissipation Pd - mW
Peak Forward Current Ifp 150 mA
Continuous Forward Current Ifm 20 mA
Reverse Voltage VR 5 V
Operating Temperature Range            topr -40 → +85
Storage Temperature Range Tstg  -40 → +100
Static Voltage Var - V

* Lead Sodering Temperature:260℃  for 3 seconds
* For  operation above 25℃,  The Ifm Ifp & Pd must be derated, the Curent derating is –0.36mA/℃ for  DC drive and  -0.86mA/℃ for Pulse drive, the power dissipation is  -0.75mW/℃. The product working current must not more than the 60% of the Ifm or Ifp according to the working temperature.


Optical-Electrical Characteristic

Parameter Test CONDITING Symbol Min Type Max Unit
Luminous Intensity IF=10mA Iv 200 250 300 Mcd
Forward Voltage IF=10mA VF - 3.2 - V
REVERSE Current VR = 5V IR - 80   uA
Peak Wavelength IF=10mA λp 515 517 520 nm
Spectral Bandwidth IF=10mA △λ - 40 - nm
View Angle IF=10mA 2θ1/2 -   - Deg.

Storage & Soldering Condions:
Store with care. Storing the units in bad condition will cause the reflector sheet and decrease it’s adhesive  power. Storage  the  products  under  the condition :temperature ( 25℃ ± 10℃ ) and humidity (65℃ CRH±20℃ CRH) our recommendation. 
The Soldering Temperature is 260±5℃ and Soldering Time should be less than 3 sec, and soldering iron power should be less than 30W. 
The soldering point should be farther than 1.6mm from boby. 

For any technical support or suggestion, please kindly go to our forum.


耐蝕烙鐵頭 5mm(木柄烙鐵4~60W)
$ 60.0 元
1 x '耐蝕烙鐵頭 5mm(木柄烙鐵4~60W)'
$ 160.0 元
1 x 'SMT專用烙鐵60W/110V'
20個-1/4W 330Ω 電阻DIP
$ 5.0 元
1 x '20個-1/4W 330Ω 電阻DIP'
16mm 可變電阻 10K(插板式)B類
3腳 可調電阻 微調電阻 電位器 B10K
$ 10.0 元
1 x '16mm 可變電阻 10K(插板式)B類'
10個-2SA1015-GR TO-92 (PNP)
PNP Silicon Plastic-Encapsulate Transistor
$ 16.0 元
1 x '10個-2SA1015-GR TO-92 (PNP)'
10個- 25V22UF 迷你型 台製5*7
$ 11.0 元
1 x '10個- 25V22UF 迷你型 台製5*7'