Description
Description
Tab5 is a developer-oriented, highly extensible portable IoT terminal development device that integrates a dual-SoC architecture and abundant hardware resources. Its main controller is the RISC-V-based ESP32-P4 SoC, equipped with 16 MB Flash and 32 MB PSRAM; the wireless module uses ESP32-C6-MINI-1U, supporting Wi-Fi 6 with an antenna system that can switch between a built-in 3D antenna and an external MMCX antenna port, flexibly adapting to different deployment environments and ensuring high data throughput and low latency.
For visuals and interaction, Tab5 features a 5″ 1280×720 IPS TFT display driven over MIPI-DSI, with touch input handled by the GT911 multi-touch controller (I²C) for smooth, precise response. A MIPI-CSI-connected SC2356 2 MP camera (1600×1200) enables HD video capture, image processing, and edge AI applications (e.g., face recognition, object tracking).
I/O and expansion include USB-A (Host) and USB-C (USB 2.0 OTG) ports for traditional peripherals; industrial communication via RS-485 (SIT3088 with switchable 120 Ω termination); 1 × GROVE, 1 × M5BUS, GPIO_EXT header, and a Micro SD slot; plus a STAMP solder-pad for Cat.M/NB-IoT/LoRaWAN modules. A Reset/Boot button allows quick reset and firmware flashing.
Audio/video uses an ES8388 audio codec with ES7210 AEC front end, dual-mic array, 3.5 mm jack, and 1 W 8 Ω NS4150B speaker for high-fidelity recording and playback. The onboard BMI270 six-axis sensor (accel+gyro, interrupt wakeup) can trigger MCU wakeup on motion.
Time and power management integrate an RX8130CE real-time clock (interrupt wakeup); a 2S NP-F550 removable Li-ion battery; and IP2326 charging, MP4560 buck-boost, and INA226 real-time monitoring circuits to ensure stable operation without external power. A side-mounted Power button provides one-touch on/off.
Structure-wise, Tab5 features a side-mounted standard 1/4″-20 tripod mount nut for direct mounting to tripods or other supports, facilitating imaging and deployment.
Tab5 is ideal for smart home control, remote monitoring, industrial automation, IoT prototyping, and educational research, offering developers and enterprises a full-featured, extensible, high-performance platform.
Note
Tab5 Kit is the full kit version with a built-in removable 2S NP-F550 Li-ion battery, while the standard Tab5 does not include a battery and requires external power or a separately purchased battery.
Features
- ESP32-P4 dual-core MCU
- ESP32-C6 wireless module
- Wi-Fi 6
- Built-in 3D antenna & MMCX external antenna port
- 5″ 720P MIPI-DSI display
- GT911 multi-touch
- SC2356 2 MP camera
- USB-A Host + USB-C OTG
- RS-485 industrial interface
- Grove & M5BUS expansion
- Micro SD card slot
- STAMP expansion pad
- ES8388 audio codec
- ES7210 AEC dual microphones
- 1W speaker + 3.5 mm jack
- BMI270 six-axis sensor
- RX8130CE real-time clock
- Reset/Boot & Power buttons
- NP-F550 2S removable battery
- Standard 1/4″-20 tripod mount nut
- Development platforms:
Includes
Tab5
- 1 × Tab5
- 1 × 1.25-6P single-ended terminal wire
Tab5 Kit
- 1 × Tab5 Kit
- 1 × 1.25-6P single-ended terminal wire
- 1 × NP-F550 2S 2000 mAh removable battery
Applications
- Smart home control
- Remote monitoring systems
- IoT device development
- Industrial automation
Specifications
| Specification |
Parameter |
| Main Controller SoC |
ESP32-P4NRW32 (RISC-V 32-bit, dual-core/single-core switchable, up to 400 MHz) |
| Wireless Module SoC |
ESP32-C6-MINI-1U (supports Wi-Fi 6 @ 2.4 GHz / Thread / ZigBee) |
| Antenna |
Built-in 3D antenna & MMCX external antenna port |
| Flash |
16 MB |
| PSRAM |
32 MB |
| Display |
5″ IPS TFT (1280×720) |
| Touch |
GT911 multi-touch controller (I²C) |
| Camera |
SC2356 @ 2 MP (1600×1200) via MIPI-CSI interface |
| Audio Chip |
ES8388 codec; ES7210 AEC front end |
| Microphone |
Dual-mic system (AEC echo cancellation) |
| Speaker |
1 W @ 8 Ω NS4150B |
| Headphone Jack |
3.5 mm |
| USB Ports |
USB-A (Host), USB-C (USB 2.0 OTG) |
| RS485 Port |
SIT3088 (switchable 120 Ω termination) |
| Expansion Interfaces |
1 × GROVE, 1 × M5BUS, GPIO_EXT header |
| Storage Expansion |
Micro SD card slot |
| Expansion Pad |
STAMP pad (supports Cat.M / NB-IoT / LoRaWAN modules) |
| Motion Sensor |
BMI270 six-axis (accel + gyro, interrupt wakeup) |
| RTC |
RX8130CE real-time clock (interrupt wakeup) |
| Reset/Boot Button |
Single button for reset & flashing mode |
| Charging Management |
IP2326 charging controller |
| Power Monitoring |
INA226 (bus current/voltage monitoring) |
| Battery |
2S NP-F550 removable Li-ion battery, 7.4 V, 2000 mAh (14.8 Wh) |
| Product Size |
Tab5: 128.0 × 80.0 × 12.0 mm
Tab5 Kit: 128.0 × 80.0 × 26.7 mm |
| Product Weight |
Tab5: 124.0 g
Tab5 Kit: 277.4 g
Battery: 97.9 g |
| Packaging Size |
Tab5: 148.0 × 103.0 × 21 mm
Tab5 Kit: 191.0 × 103.0 × 25.0 mm |
| Gross Weight |
Tab5: 162.5 g
Tab5 Kit: 277.4 g |
LEARN AND DOCUMENTS
