| ‧ High Performance, Low Power AVR® 8-Bit Microcontroller
|
| ‧ Advanced RISC Architecture
|
| – 131 Powerful Instructions – Most Single Clock Cycle Execution
|
| – 32 x 8 General Purpose Working Registers
|
| – Fully Static Operation
|
| – Up to 20 MIPS Throughput at 20 MHz
|
| – On-chip 2-cycle Multiplier
|
| ‧ High Endurance Non-volatile Memory Segments
|
| – 4/8/16K Bytes of In-System Self-Programmable Flash progam memory
|
| – 256/512/512 Bytes EEPROM
|
| – 512/1K/1K Bytes Internal SRAM
|
| – Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
|
| – Data retention: 20 years at 85°C/100 years at 25°C
|
| – Optional Boot Code Section with Independent Lock Bits
|
|
| In-System Programming by On-chip Boot Program |
|
| True Read-While-Write Operation |
| – Programming Lock for Software Security
|
| ‧ Peripheral Features
|
| – Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
|
| – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
|
| – Real Time Counter with Separate Oscillator
|
| – Six PWM Channels
|
| – 8-channel 10-bit ADC in TQFP and QFN/MLF package
|
|
| Temperature Measurement |
| – 6-channel 10-bit ADC in PDIP Package
|
|
| Temperature Measurement |
| – Programmable Serial USART
|
| – Master/Slave SPI Serial Interface
|
| – Byte-oriented 2-wire Serial Interface (Philips I2C compatible)
|
| – Programmable Watchdog Timer with Separate On-chip Oscillator
|
| – On-chip Analog Comparator
|
| – Interrupt and Wake-up on Pin Change
|
| ‧ Special Microcontroller Features
|
| – Power-on Reset and Programmable Brown-out Detection
|
| – Internal Calibrated Oscillator
|
| – External and Internal Interrupt Sources
|
| – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby
|
| ‧ I/O and Packages
|
| – 23 Programmable I/O Lines
|
| – 28-pin PDIP, 32-lead TQFP, 28-pad QFN/MLF and 32-pad QFN/MLF
|
| ‧ Operating Voltage:
|
| – 1.8 - 5.5V for ATmega48P/88P/168PV
|
| – 2.7 - 5.5V for ATmega48P/88P/168P
|
| ‧ Temperature Range:
|
| – -40°C to 85°C
|
| ‧ Speed Grade:
|
| – ATmega48P/88P/168PV: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V
|
| – ATmega48P/88P/168P: 0 - 10 MHz @ 2.7 - 5.5V, 0 - 20 MHz @ 4.5 - 5.5V
|
| ‧ Low Power Consumption at 1 MHz, 1.8V, 25°C:
|
| – Active Mode: 0.3 mA
|
| – Power-down Mode: 0.1 μA
|
| – Power-save Mode: 0.8 μA (Including 32 kHz RTC) |
|
|
|
|
|
|
|
|
|