※XBee S2C ZigBee 無線通訊模組

這是 Digi 的 XBee XB24-CZ7WIT-004 模組。 2C 系列改進了功率輸出和數據協議。 2C 系列模組允許您基於 XBee ZB ZigBee 網狀固件創建複雜的網狀網路。 這些模組允許在微控制器、計算機、系統之間進行非常可靠和簡單的通信，實際上任何帶有串行端口的東西！ 支持點對點和多點網路。

注意：如果您正在尋找簡單的點對點配置，您可能想嘗試使用系列 1。 Series 2 需要相當多的設置和配置。 我們強烈推薦構建無線傳感器網路作為設置網狀網路的指南。
注意：1 系列和 2 系列 XBee 模組具有相同的引腳排列。 但是，系列 1 模組無法與系列 2 模組通信。

Description

This is the XBee XB24-CZ7WIT-004 module from Digi. Series 2C improves on the power output and data protocol. Series 2C modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware.
These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Note: If you are looking for a simple point-to-point configuration, you might want to try the Series 1 instead. The Series 2 requires considerable setup and configuration. We highly recommend Building Wireless Sensor Networks as a guide for setting up mesh networks.
Note: Series 1 and Series 2 XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2 modules.

Features

• 3.3V @ 33mA
• RF 250 Kbps, Serial up to 1 Mbps Data Rate
• 3.1mW output ( +5 dBm)
• 4000 ft (1200 m)
• Built-in antenna
• Fully FCC certified
• 4 10-bit ADC inputs
• 15 digital IO pins
• 128-bit encryption
• Local or over-air configuration
• AT or API command set

Documents

• Dimensional Drawings
• Digi Examples and Guides
• X-CTU Software

• XBee S2C ZigBee 無線通訊模組 x 1