XBee 2mW PCB Antenna - Series 2 (ZigBee Mesh)【限量】

商品簡介

本商品為研發實驗用的模組，必須在二次加工後，才具備訊號傳輸功能。
並非直接插電後可直接使用之射頻模組，非屬電信管制射頻器材。

XBee 2mW PCB Antenna - Series 2 (ZigBee Mesh)

這是一個新的 2.4GHz XBee XB24-Z7PIT-004 模組 (Digi formally Maxstream) 。沿用舊板Series 2.5 並更新軔體。這個模組利用簡單的Serial command (串列傳輸)來執行在802.15.4上的Zigbee通訊協定。可支援任何微處理器, 電腦與系統間的通訊, 只要他們具有 serial port。不論是點對點( point-to-point) 或是多點間(多點間的網路)multi-point networks, 都可以支援。

PS : XBee series 1 和 series 2.5 雖然有相同pin腳, 但是, 兩者不能互相通訊

注意：如果你使用XBee只是要點對點傳輸，建議你使用XBee series 1。因為XBee series 2 需要較進階的設定才能使用。

Description: This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
Not sure which XBee module or accessory is right for you? Check out our XBee Buying Guide!
Note: If you are looking for a simple point-to-point configuration, you might want to try the Series 1 instead. The Series 2 requires considerable setup and configuration. We highly recommend Building Wireless Sensor Networks as a guide for setting up mesh networks.
Note: Series 1 and Series 2 XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2 modules.
Note: If you are using these outside of the United States, please check with your local laws regarding radio communication.

商品規格

Features:

• 3.3V @ 40mA
• 250kbps Max data rate
• 2mW output (+3dBm)
• 400ft (120m) range
• Built-in antenna
• Fully FCC certified
• 6 10-bit ADC input pins
• 8 digital IO pins
• 128-bit encryption
• Local or over-air configuration
• AT or API command set
• 3.3V (40mA)
• 資料傳送速率最大 2 50kbps
• 輸出 2mW (+3dBm)
• 工作範圍 400ft (120m)
• PCB天線
• FCC 認證
• 6 組 10-bit ADC input pins
• 8 組 IO pins ,128-bit 加密
• Local or over-air configuration
• AT or API command set
• 需要外加天線

下載資料

Documents:

• Digi XBee Series 2 Page
• Datasheet
• Dimensional Drawings
• Digi Examples and Guides
• X-CTU Software

Replaces: WRL-10415

出貨清單

• XBee 2mW PCB Antenna - Series 2 (ZigBee Mesh) x 1