3mm 輪軸(2個,for LEGO 輪子)【限量】

3mm Hexagonal Shaft Adapter for LEGO Wheels (Pair)

Overview

This adapter makes it possible to use LEGO wheels with 3mm hexagonal shafts, like the ones found on many Tamiya gearboxes. These are great, inexpensive gearboxes for building small robots, and LEGO makes a number of very high-quality wheels as part of their Technic and Mindstorms product lines, many of which would also be excellent for use on a small robot. With this adapter, you can integrate LEGO wheels of your choice into a robot. We sell the adapters in pairs, so that you can make a two-wheeled robot.

Instructions

1. Fit the adapter onto the hexagonal metal shaft. You will need to push quite hard; be careful not to damage the shaft or gearbox.
2. Slide the adapter into a LEGO wheel of your choice.

The adapter fits very tightly on the metal shaft, so that it will remain attached to the shaft when the wheel is removed. We recommend that you leave the adapter permanently attached to the metal axle; repeated removal and insertion may loosen the connection, making it more likely to fall off.

Dimensions

The adapter is made of ABS plastic, similar to the plastic used in LEGO blocks.
The adapter can be used with any LEGO wheel that accepts a standard axle, as long as the tire does not extend more than 0.35" beyond the inner edge of the hub so that the gearbox body will not rub against the tire.

Dimensions

• 3mm 輪軸(2個,for LEGO 輪子) x 1