{{ 'fb_in_app_browser_popup.desc' | translate }} {{ 'fb_in_app_browser_popup.copy_link' | translate }}

{{ 'in_app_browser_popup.desc' | translate }}

Adafruit 面板安裝 乙太網路延長線 RJ45 CAT5e 31cm

Adafruit 面板安裝 乙太網路延長線 RJ45 CAT5e 31cm

面板安裝型乙太網路延長線,方便將有網路埠的設備裝進機殼
RJ45 8P 母座 → 8P 公頭|CAT5e 24AWG 直通|全長 31cm(線長 23cm)
附兩顆 4-40 固定螺絲,可用於厚度 0.25 吋以下的面板


全店,滿千免運優惠(限郵寄和超商純取貨)

全店,本賣場無實體店面,無提供自取服務,敬請見諒。

NT$220
NT$100
數量 組合數量
一次最大商品購買數量限制為 99999
該數量不適用,請填入有效的數量。
售完

商品存貨不足,未能加入購物車

您所填寫的商品數量超過庫存

{{'products.quick_cart.out_of_number_hint'| translate}}

{{'product.preorder_limit.hint'| translate}}

每筆訂單限購 {{ product.max_order_quantity }} 件

現庫存只剩下 {{ quantityOfStock }} 件

若想購買,請聯絡我們。
商品描述
送貨及付款方式
商品描述

商品簡介

DESCRIPTION

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Beagle Bone, Raspberry Pi, Arduino Ethernet into a box.

The jack half has two mounting 'ears' with 4-40 screws installed, 1" inch / 25mm apart. The ears are flexible so the holes don't have to drilled very precisely. Can be used with box walls up to 0.25" wide. The screws can be put on from the back for 'reverse' mounting if the box thickness is a problem. Entire unit is 12" long (9" cabling between jack and RJ45 Ethernet connector).

TECHNICAL DETAILS

  • Panel mount Ethernet 8P socket with Ethernet 8P plug at cable end. Straight-through extension
  • CAT 5e
  • 24 AWG wires
  • 12" long / 31 cm from tip to tip
  • 9" / 23 cm cabling from jack to connector
  • Two 10mm 4-40 mounting screws, 24mm apart
  • Plastic "boot" at Ethernet end is 20mm tall x 33mm wide (20mm where it is smaller behind the mounting flange) x 28mm deep


出貨清單

  • 面板安裝乙太網路延長線 x 1
送貨及付款方式

送貨方式

  • 郵局國際貨運
  • 郵寄【請填寫收件地址】
  • 7-11 取貨付款 (C2C)
  • 7-11 取貨不付款 (C2C)
  • 黑貓-常溫
  • 黑貓-常溫(貨到付款)
  • 報價單草稿

付款方式

  • 專員接洽
  • Apple Pay
  • 銀行轉帳
  • 信用卡付款
  • 黑貓宅配(貨到付款)
  • 7-11取貨付款

您可能喜歡...