welcome iCShop!     服務時間:週一 ~ 週五 9:00~12:00 / 13:00~17:00

MyoWare Muscle Sensor

NT$ 1,400

出貨時程

【現貨+預購】如遇缺貨,預購交期為4~10個工作天(不含例假日)

產品貨號

368030602098

數量

有庫存

關鍵字

肌電傳感器肌肉信號傳感器sparkfun

運送方式

7-11取貨付款 郵寄(單一運費) 宅配 宅配貨到付款 外島郵寄 順豐快遞 順豐快遞貨到付款



商品簡介

用我們的肌肉來控制事物是我們大多數人習慣於這樣做的方式。我們按下按鈕,拉動槓桿,移動操縱桿......但是如果我們可以把按鈕,槓桿和操縱桿拿出來呢?這是來自Advancer Technologies的MyoWare肌肉傳感器,一種Arduino驅動的全功能肌電圖(EMG)傳感器。MyoWare板通過測量肌肉的過濾和矯正的電活動來起作用; 根據所選肌肉的活動量輸出0V電壓,其中Vs表示電源的電壓。這很簡單:堅持幾個電極(不包括),讀出電壓,並彎曲一些肌肉!
MyoWare肌肉傳感器是舊式肌肉傳感器的最新版本,現在採用了新的可穿戴設計,可讓您將  生物醫學傳感器墊  直接連接到電路板本身,擺脫那些討厭的電纜。這個新電路板還包括一系列其他新功能,包括+ 3.1V至+ 5V的單電源電壓,RAW EMG輸出,極性保護電源引腳,指示燈LED和(最後)開/關開關。此外,我們還開發了一些可以連接到Myoware肌肉傳感器的屏蔽(Cable,  Power和  Proto),以幫助提高其多功能性和功能性!
通過檢測其電勢來測量肌肉活動,被稱為肌電圖(EMG),傳統上已被用於醫學研究。然而,隨著不斷縮小但更強大的微控制器和集成電路的出現,EMG電路和傳感器已經進入各種控制系統。

注意:
生物醫學傳感器墊可以在 下面的推薦產品部分找到,  可以單獨購買。

Description: 
Using our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks… but what if we could take the buttons, levers and joysticks out of the equation? This is the MyoWare Muscle Sensor, an Arduino-powered, all-in-one electromyography (EMG) sensor from Advancer Technologies. The MyoWare board acts by measuring the filtered and rectified electrical activity of a muscle; outputting 0-Vs Volts depending the amount of activity in the selected muscle, where Vs signifies the voltage of the power source. It’s that easy: stick on a few electrodes (not included), read the voltage out and flex some muscles!
The MyoWare Muscle Sensor is the latest revision of the Muscle Sensor of old, now with a new wearable design that allows you to attach biomedical sensor pads directly to the board itself getting rid of those pesky cables. This new board also includes a slew of other new features including, single-supply voltage of +3.1V to +5V, RAW EMG output, polarity protected power pins, indicator LEDs, and (finally) an On/Off switch. Additionally, we have developed a few shields (CablePower, and Proto) that can attach to the Myoware Muscle Sensor to help increase its versatility and functionality!
Measuring muscle activity by detecting its electric potential, referred to as electromyography (EMG), has traditionally been used for medical research. However, with the advent of ever shrinking yet more powerful microcontrollers and integrated circuits, EMG circuits and sensors have found their way into all kinds of control systems.

Note:
Biomedical sensor pads can be found in the Recommended Products section below to be purchased separately.

特點:

  • 可穿戴設計
  • 單電源
    • + 2.9V至+ 5.7V
    • 極性反轉保護
  • 兩種輸出模式
    • EMG信封
    • 原始EMG
  • 通過盾牌擴展
  • LED指示燈
  • 專為微控制器設計
  • 可調增益

Features:

  • Wearable Design
  • Single Supply
    • +2.9V to +5.7V
    • Polarity reversal protection
  • Two Output Modes
    • EMG Envelope
    • Raw EMG
  • Expandable via Shields
  • LED Indicators
  • Specially Designed For Microcontrollers
  • Adjustable Gain
商品規格

Dimensions: 
0.82" x 2.06"

尺寸: 
0.82“x 2.06” 

下載資料

Documents:

出貨清單
  • MyoWare Muscle Sensor x 1